Flow rate, particle retention
and the characteristics of a surface treatment additive will dictate which type of filter
is most appropriate. Delaminated clay filtration should occur at offloading in receiving,
out of the storage tank(s), and immediately before use.
Due to higher flow rates in the receiving area, we typically recommend the
DCF Mechanically-Cleaned Filter Systems or a MAX-LOAD Cartridge Filter System.
Filtration should also occur at a surface treatment additive's
point of use. For delaminated clay, we recommend the
DCF
Mechanically-Cleaned Filter Systems or a
MAX-LOAD Cartridge Filter System.
Download
Paper Process Flow Chart
Download
Clay Processing White Paper
|