Flow rate, particle retention and the characteristics of a surface
treatment additive will dictate which type of filter is most appropriate.
Dye filtration should occur at offloading
in receiving, out of the storage tank(s), and immediately before use.
Due to higher flow rates in the receiving area, we typically recommend the
DCF Mechanically-Cleaned Filter Systems or a MAX-LOAD Cartridge Filter System.
Filtration should also occur at a surface treatment additive's point of use. For dyes we recommend the
DCF Mechanically-Cleaned Filter Systems or a
MAX-LOAD
Cartridge Filter System.
Download Paper Process flow chart
|
Equipment!