Flow rate, particle retention and the characteristics of the additive will dictate which type of filter is most appropriate.
Kaolin filtration should occur at offloading in receiving, out of the storage tank(s), and immediately before application.
Documented Case Study:
Kaolin Slurry - How a Self-Cleaning Filtration Unit Handled the Hard-to-Filter Material at a Lower Cost.
Due to higher flow rates in the receiving area, we typically recommend the DCF Mechanically-Cleaned Filter System or a MAX-LOAD Bag and Cartridge Filter System.
Filtration should also occur at an additive's point of use. For this specific application, we recommend the DCF Mechanically-Cleaned Filter Systems and MAX-LOAD Bag and Cartridge Filter System.
Download Paper Process flow chart
|
Equipment!